Need help?Do you have a question about the SoundQubed Q1-3500D.1 and is the answer not in the manual?
Highlights the key engineering and performance aspects of SoundQubed amplifiers.
Details the technical parameters and performance metrics for the SoundQubed amplifier line.
Table showing output power ratings for various models at different impedance levels.
Description of RCA input/output jacks, power indicators, gain, subsonic, bass boost, and LPF controls.
Technical specifications specifically for the AQ-4 amplifier model.
Details the output power capabilities of the AQ-4 amplifier at different impedances.
Guidance on connecting power, ground, and remote turn-on cables for amplifier installation.
Recommendations for selecting a suitable mounting location for optimal performance and safety.
Instructions on how to properly connect speakers to SoundQubed amplifiers.
Diagram and steps for linking two SoundQubed amplifiers for increased power output.
Common issues and solutions for no sound, protection mode, and noise problems.
General| Signal to Noise Ratio | > 90 dB |
|---|---|
| Subsonic Filter | 10Hz - 50Hz |
| Low Pass Filter | 35Hz - 250Hz |
| Bass Boost Frequency | 45 Hz |
| Amplifier Class | D |
| Number of Channels | 1 |
| RMS Power at 1 Ohm | 3500W |
| RMS Power at 4 Ohms | 1000 Watts |
| Frequency Response | 10Hz |
| Input Sensitivity | 0.2V |
| Bass Boost | 0dB - 12dB |
| Efficiency | 85% |
| Dimensions | 2.5" |
To Next Page