Do you have a question about the Soundstage STAGE 3D Series and is the answer not in the manual?
Thanks the customer for purchasing Soundstage loudspeakers and outlines the manual's purpose.
Step-by-step instructions for attaching the feet, cap, and protective pad to the speaker cabinet.
Guidelines for speaker separation, room shape impact, tweeter height, and wire management for best sound.
Describes typical home theater setups and the benefit of using same-brand components.
Details how to maximize the 3D effect using speaker placement and the 3DX module.
Guidance on positioning front and rear channel speakers for optimal sound dispersion.
Explains how a powered subwoofer enhances the system's low-frequency response.
Ensures all equipment is turned off before making any electrical connections.
Details recommended wire gauge (AWG) based on cable length for optimal signal transfer.
Instructions for stripping insulation and maintaining correct positive/negative polarity for connections.
Connects speakers using lower binding posts and jumpers for the immersive 3DX effect.
Connects speakers to bottom binding posts, disabling jumpers for traditional forward sound.
Connects main and surround effect channels from receivers to enable discrete channels.
Explains traditional connection for bookshelf and center channel speakers using one set of binding posts.
Steps to verify correct wiring and ensure a proper stereo image during playback.
Recommends cleaning with a damp cloth and avoiding chemical cleaners to protect the finish.
| Impedance | 8 Ohms |
|---|---|
| Sensitivity | 88dB |
| Color | Black |
| Speaker Type | Bookshelf |
| Frequency Response | 20kHz |
| Driver Size | 1" Tweeter |
Loading...