SoundTools CAT TAILS User Manual

CAT TAILS MX STARTER GUIDE
Congratulations on your purchase of your super cool SoundTools CAT Tails.
The CAT Tails will simplify your stage wiring system with its compact,
reliable and disconnectable design. Here are some tips to get you started.
Step 1:
Use channels 1 thru 4 to connect
your XLR lines. The channel
numbers are laser etched on the
connector shells.
Step 2:
Insert a shielded CAT5e/6/7 cable
into the etherCON barrel, then
connect the other end of your
shielded cable to another
CAT Tails, CAT Box, CAT Rack or
other SoundTools RATCAT Family
product.
The Tails
Each individual cable measures
approximately 24” in length.
CAT Tails use cables that are
designed with flexibility while
adhering to AES3 protocols.
Signal Types
Each of the four XLR channels
are isolated, meaning you can
run different types of signal
simultaneously over the same
CAT5e cable. The most common
types of signal include analog
audio, AES3, DMX and intercom.

SoundTools CAT TAILS Specifications

General

Category	Media Converter
Channels	4
Impedance	600 Ohms
Frequency Response	20 Hz - 20 kHz
Connectors	RJ45, XLR

Summary

CAT TAILS MX Starter Guide Overview

Step 1: Connecting XLR Lines

Use channels 1 through 4 to connect XLR lines. Channel numbers are laser etched on connector shells.

Step 2: Cable Connection

Insert a shielded CAT5e/6/7 cable into the etherCON barrel, then connect to another CAT Tails or SoundTools product.

Signal Types Supported

Four isolated XLR channels support simultaneous signals like analog audio, AES3, DMX, and intercom over CAT5e.

Cable Specifications: The Tails

Each individual cable measures approximately 24" and is designed for flexibility, adhering to AES3 protocols.

CAT TAILS FX Starter Guide Overview

Step 1: XLR Line Connection

Connect XLR lines using channels 1 through 4. Channel numbers are laser etched on the connector shells.

Step 2: EtherCON Barrel Connection

Insert a shielded CAT5e/6/7 cable into the etherCON barrel and connect the other end to compatible SoundTools gear.

Signal Types for CAT Tails FX

Isolated XLR channels allow multiple signal types, including analog audio, AES3, DMX, and intercom, over CAT5e.

The Tails Cable Length and Design

Each CAT Tails cable is approximately 24" long, designed for flexibility, and adheres to AES3 protocols.