South nt-023 User Manual

Covers storage, temperature, transport, setup, and cleaning guidelines.

Details laser safety, screen care, maintenance warnings, and product compliance.

Explains the function of each key on the instrument's control panel.

Glossary of abbreviations and their meanings used in the manual.

Details on measuring and displaying vertical and horizontal angles.

Procedure for setting the current horizontal angle value.

Guide to aiming, focusing, and initiating distance measurement.

Instructions for inputting distances for stake-out operations.

Configuration options for measurement modes and times.

Step-by-step guide for stake-out along a defined baseline.

Procedure for stake-out at arbitrary points independent of the axes.

How to set the laser plummet and adjust its brightness.

Instructions for activating the laser pointer.

Enabling/disabling tilt compensation and checking tilt values.

Setting prism constants, measurement modes, and times.

Adjusting screen backlight, key beep, and crosshair backlight.

Setting units for angle, distance, temperature, and air pressure.

Options for displaying vertical angle measurements.

Configuring scale factor and station point height.

Adjusting parameters related to temperature and air pressure correction.

Configuring sleep time, auto power-off, and battery status.

Step-by-step procedure to calibrate the vertical index angle.

Guide for inspecting and correcting the additive constant.

Instructions for upgrading the instrument's firmware.

Procedures for entering factory mode and resetting to default settings.

Accessing and viewing model, serial, and version details.