Need help?Do you have a question about the South S1 and is the answer not in the manual?
Details on power, TX indicator, and navigation buttons (Up, Enter, Down) for device control.
Describes the 'POWER LOW' alert displayed on the screen and its meaning.
Explains using navigation buttons to select, modify, and confirm settings.
Instructions for setting and modifying radio channels for communication.
Instructions for setting and modifying radio frequencies for operation.
Details on selecting low (10W) or high (25W) power modes for the radio.
Instructions for setting the air baudrate for wireless data communication.
Steps to select between SOUTH/Trimble communication protocols.
Instructions for setting the serial port baudrate for data transfer.
Indicates where the current power voltage is displayed on the device.
Steps to set up and confirm Bluetooth connection for the device.
Procedure for resetting the device to its default settings.
To Next Page
General