Need help?Do you have a question about the South S660N and is the answer not in the manual?
General| Operating System | Linux |
|---|---|
| Internal Memory | 8 GB |
| Ingress Protection | IP67 |
| Signals | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Positioning Accuracy | RTK: Horizontal: 8 mm + 1 ppm, Vertical: 15 mm + 1 ppm |
| Tilt survey | Supported |
| Data format | RTCM 2.x, RTCM 3.x |
| Communication | Bluetooth, Wi-Fi |
| Battery | Internal Li-ion battery |
| Shock Resistance | 2 m pole drop |
Brief welcome and overview of the manual's purpose.
Explains the manual covers the S660N receiver and its features.
Highlights key features of the S660N GNSS Network RTK Receiver.
Details the physical construction and materials of the S660N receiver.
Describes the LED indicators on the front control panel for status.
Explains components and information found on the bottom of the receiver.
Introduces the communication port and web UI access via cable.
Instructions for powering the S660N receiver on and off.
Explains how to use the reset key for forced shutdown.
Guides users on performing a self-check for receiver diagnostics.
Details the procedure for resetting the receiver to factory default settings.
Provides information on battery charging methods and indicators.
Introduces the real-time configuration and monitoring via internal web UI.
Explains accessing the web UI via USB connection using an Ethernet port.
Shows the main interface of the web UI with operation menu and information.
Displays system, work, and position information of the S660N receiver.
Allows configuration of various parameters like general, base, and satellite settings.
Provides tables and skyplot for viewing and configuring satellite tracking.
Used for configuring static mode parameters and downloading data.
Covers general, serial port, TCP/IP, and NTRIP configuration for data transfer.
Configures internet access methods including WIFI, Bluetooth, and router settings.
Explains how to update the receiver's firmware via online or local methods.
Manages user login authority and permissions for the Web UI.
Provides access to system logs for troubleshooting and tracking receiver status.
Details how to enable the S660N to broadcast its own WIFI hotspot.
Explains setting up the receiver to connect to external WIFI as a datalink.
Guides connecting S660N with the GIStar application on Android devices.
Provides instructions for connecting S660N with the EGSTAR software.
Details how to connect S660N using the SurvCE software.
Explains how to configure the S660N receiver using FieldGenius software.
Describes the procedure for accurately measuring antenna height.
Outlines the steps for conducting static measurement in the field.
Explains how to configure the receiver for static mode via web UI or software.
Covers downloading static data from the receiver to a computer.
Introduces simple processing of static data using South Total Control (STC) program.
To Next Page
