EasyManua.ls Logo

Southern Enterprises FA5133 - User Manual

Southern Enterprises FA5133
25 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PO#
FA5133
ELECTRICAL SPECIFICATIONS | ESPECIFICACIONES ELÉCTRICAS | CARACTÉRISTIQUES ÉLECTRIQUES
Voltage:
Tensión:
Tension :
120V, 60 Hz
Amps:
Amperios:
Intensité de courant :
11.7 Amps
Watts:
Watts:
Puissance :
1400 Watts
Lighting:
Iluminación:
Éclairage :
LED

Table of Contents

Questions and Answers

  • M
    Michelle BryantAug 11, 2025
    How to fix Southern Enterprises FA5133 that doesn't turn on?
    • W
      webbmelissaAug 11, 2025
      If your Southern Enterprises Indoor Fireplace heater doesn't turn on, first ensure the main power supply switch and the heater power switch are both on. Check if the circuit breaker has tripped, indicating too many appliances on the circuit; the heater should be on an individual circuit. Verify the heater is plugged into a functioning outlet. If the heater system is overheated, possibly due to being covered or blocked air inlets/outlets, remove any obstructions, turn off the power, unplug the unit, wait ten minutes, then plug it back in and turn it on again. For damaged cords/plugs, loose wiring, or faulty outlets, contact customer service or replace the outlet.
  • M
    Matthew WrightAug 26, 2025
    Why is the flame intensity low on my Southern Enterprises FA5133 Indoor Fireplace?
    • M
      Michelle AndersenAug 27, 2025
      If your Southern Enterprises Indoor Fireplace has a low flame or no flame, try turning the flame adjusting knob to the maximum setting. If the issue persists, it might be due to loose wiring at the wall power outlet, in which case you should contact a qualified electrician.
  • S
    Stacy CainSep 2, 2025
    What to do if flames are frozen on Southern Enterprises Indoor Fireplace?
    • C
      claire24Sep 2, 2025
      If the flames are frozen on your Southern Enterprises Indoor Fireplace, it could be due to loose wiring at the wall power outlet. Check all wiring for loose connections and contact a qualified electrician. Alternatively, the flame element might not be attached to the motor, or the rotation motor itself could be defective. In either of these cases, contact customer service.
  • A
    Autumn HumphreySep 10, 2025
    What to do if Southern Enterprises Indoor Fireplace has no airflow?
    • D
      Daniel SullivanSep 12, 2025
      If the "HEATER POWER" switch on your Southern Enterprises Indoor Fireplace is on but there's no airflow, first check the air inlet and outlet for blockages and remove any obstructions to ensure adequate space around the unit. If the system overheated and the temperature limit thermostat cut off, turn off the power switch, unplug the unit, wait ten minutes, then plug it back in and turn the heater on again. For a defective fan motor or a badly balanced fan blower, contact customer service.

Southern Enterprises FA5133 Specifications

General IconGeneral
TypeElectric Fireplace
Power1500 Watts
Fuel TypeElectric
Fireplace TypeFreestanding
Heating AreaUp to 400 sq ft
Voltage120V
MaterialMetal, Glass
FeaturesRemote Control, Adjustable Flame Brightness, Timer

Related product manuals