To Next PageTo Next PageWhat to do if the burner sparks but does not fire on my Southern Pride MLR-150 Grill?
If the burner sparks but doesn't fire on your Southern Pride Grill, try these steps: First, remove any ash in the burner head. Then, check that the gas is turned on and verify the supply line pressure. Finally, clean the electrode.
What to do if the pilot lights, but burner does not, on a Southern Pride Grill?
If the pilot light is on, but the burner isn't igniting on your Southern Pride Grill, check for a loose wire connection at the valve and control module. Also, try cleaning the igniter rod.
General| Brand | Southern Pride |
|---|---|
| Model | MLR-150 |
| Category | Grill |
| Language | English |
Covers essential safety guidelines, warnings, and precautions for operating the smoker.
Guidance on how to receive and inspect the smoker upon delivery.
Steps for safely unloading the smoker from the transport and removing packaging.
Information on proper placement, ventilation, and minimum clearance requirements.
Details on electrical requirements and hookup procedures for the smoker.
Instructions for gas line installation, piping, and connection safety.
Specific procedures for connecting the gas supply to the smoker.
Technical specifications for the smoker's burner, including fuel and orifice sizes.
Guidelines for proper ventilation and exhaust system installation.
How to load product onto racks and rotate them during cooking.
Guidance on loading wood or charcoal into the firebox for flavoring.
How to use the digital cook and hold control for setting parameters.
Procedures for safely unloading product from the smoker.
Steps for safely removing ash and coals from the firebox.
Procedures for draining and disposing of grease from the smoker.
Recommendations for safe storage of wood used in the smoker.
Specific operating instructions for mobile units.
Electrical requirements for mobile smoker units.
Safety warnings specific to mobile smoker operation.
Daily cleaning and inspection tasks for the smoker.
Weekly checks and cleaning procedures for various smoker components.
Monthly inspection and cleaning tasks for fan, switches, and thermocouples.
Quarterly tasks including checking drive system and cleaning baffle board.
Periodic servicing including burner electrode and drive chain lubrication.
Cleaning procedures for interior and exterior surfaces as required.
Common troubleshooting steps for general and cold weather operation issues.
Steps to diagnose and resolve issues with the gas burner operation.
