To Next PageTo Next Page
Need help?Do you have a question about the Southwest Windpower SkyStream 3.7 and is the answer not in the manual?
Overview of the display's function, its LCD, status LED, and input buttons for operation.
Details menu navigation, status prompts, power display, and configuration options like channel, units, and elevation.
Covers entering turbine serial numbers and using control functions like 'All stop' and 'All start'.
Explains contrast adjustment, power sources (battery/AC), and the USB converter for importing data.
Steps to use the DataLogger and description of the basic data screen elements.
Explains how to view power/RPM data in a waveform chart and access detailed diagnostic information.
Guides on starting/stopping data logging, file formatting, and configuring turbine parameters.
Information on updating system firmware and using the installer screen.
Overview of adapting Skystream for battery charging and listing necessary software/hardware.
Step-by-step guide for installing the Battery Voltage Sensor, including wiring and connections.
Details entering turbine serial numbers and setting float voltage for the battery sensor.
Steps to configure turbines via the Installer screen, enabling charging and saving settings.
Guide to installing the necessary USB drivers for the DataLogger converter.
Step-by-step instructions for installing the DataLogger application from the CD-ROM.
Instructions on how to launch and start using the installed Skystream DataLogger.
General| Brand | Southwest Windpower |
|---|---|
| Model | SkyStream 3.7 |
| Category | Wind Turbines |
| Language | English |
