B
briggsmistyAug 1, 2025
Why is my Southwest Windpower Portable Generator propeller not spinning?
- AAllen GilbertAug 1, 2025
The propeller of your Southwest Windpower Portable Generator might be stationary due to several reasons: * Ice in the generator or on the propeller. In this case, wait for warmer weather to thaw the ice. * Debris stuck between the rotor and stator. Try gently turning the propeller by hand and use air or a piece of paper to remove any obstructions. * A loose, broken, or rubbing magnet. Contact the factory or distributor to have the rotor removed and the magnets re-glued. * A bad or worn bearing. Contact the factory or a distributor to replace the bearings.