To Next PageTo Next Page
Need help?Do you have a question about the Southwire 31212S and is the answer not in the manual?
General| Model | 31212S |
|---|---|
| Brand | Southwire |
| Resolution | 0.1°F/°C |
| Display | LCD |
| Auto Power Off | Yes |
| Data Hold | Yes |
| Max/Min Recording | Yes |
| Type | Digital Thermometer |
Explains radiation, electromagnetic spectrum, and how IR thermometers function by converting radiation to electricity.
Details critical safety warnings including laser beam hazards, handling near explosive gases, and avoiding burns from reflective surfaces.
Provides essential care instructions such as keeping the thermometer dry, storing it properly, and gentle handling.
Illustrates and lists the main parts of the IR thermometer, including the sensor, trigger, and LCD display.
Explains how the HOLD indicator retains and displays the last measured temperature after the trigger is released.
Details the 12:1 ratio, clarifying how distance affects the measurement area size for accurate readings.
Guides on pointing the thermometer, pressing the trigger, and interpreting readings for stable measurements.
Describes how to access and navigate through settings like Emissivity, Temperature Units, and Alarms using the SET button.
Explains emissivity as a material property and how to adjust it for accurate temperature measurements.
Details how to set High and Low Temperature Alarms that trigger a buzzer when thresholds are exceeded.
Covers the LOCK feature for continuous scanning and the five modes (MAX, MIN, AVG, DIF, OFF) via the MODE button.
Provides critical notes on ensuring measurement accuracy, including surface reflectivity and ambient temperature adjustments.
Step-by-step instructions for replacing the 9V battery, including unlocking the cover and securing it.
Lists detailed specifications including measurement range, accuracy, distance-to-spot ratio, and compliance standards.
Information on customer service, calibration, product registration, and relevant product compliance symbols.
