Sovereign M4E1232C - Setting Cutting Height

17
Assemble the mower
• Lift the deector guard .
• Place the grass collection box on the mounting
brackets provided at the back of the lawn mower (Fig. 8).
• Lower the deector guard onto the grass collection
box .
8
21
8
17
17
Attaching the Grass Collection Box
Setting the Cutting Height
WARNING! Ensure the power cord is disconnected from
the mains supply before adjusting the cutting height.
21
• Place the lawn mower on its side.
• Grasp the wheel axle on both sides (Fig. 9).
• Pull evenly on the axle and let it snap into the desired
position (Fig. 9).
• The correct height is around 20-40mm for a decorative
lawn and around 40-60mm for a used lawn.
A higher cut height should be selected for the rst cut of
the season.
The electric lawn mower can be adjusted to the following
cutting heights, with three position changes of the front and
rear axles :
60mm - Tall cutting height
40mm - Medium cutting height
20mm - Short cutting height