Sovereign S-22-DGP-E-S - Page 6

GUN REST INSTALLATION
e gun rest and full length shelf are supported on
the outside wall brackets with 4 removable shelf clips.
You will need to permanently secure the gun rests to
avoid shiing when accessing your guns. Remove the
shelf clips and replace them with the 4 metal "L"
brackets that are enclosed.
Aach the 4 metal brackets in the same location as
the removable shelf clips using 2 screws for each
bracket as shown in gures 1 and 2 below. e gun
rest should be level aer assembly.
1
2
SHELVES
e shelves can be installed by locating the shelf clips
to the desired location and seing the shelf in place.
40664-1511
6
18
Image demonstrates
attachment of the gun rests.
It does not necessarily
reflect the configuration of
your safe.
Image demonstrates
placement of the shelves.
It does not necessarily
reflect the configuration of
your safe.