SOYO G668 Ethernet IP Phone User Guide
-17-
account: Use phone number as E.164 and designated H323 ID filled in
account field as H323 ID to login GK.
cat account: Select this item to use cat（Cisco Access Talk）
authentication. With this item selected, please fill the user name and
password into account and pin fields respectively.
md5 account: With H323 protocol used, according to the log in
gatekeeper, enable/disable H235 encryption by selecting/diselecting this
item. With this item selected, please fill the user name and password into
account and pin fields respectively.
call type: Set call type by selecting the items in drop down list.
normal: Call out in normal way by selecting this item.
faststart: Call out in faststart way by selecting this item.
advanced: Call out in faststart and tunneling way by selecting this item. It
is a recommended way with H323 protocol used.
dtmf: Set DTMF signal sending way by selecting control string, inband
audio, signal keypad or rfc 2833 from dropdown list.
service type: Set service type used to call PSTN phone by selecting
corresponding item in dropdown list.
account: Check with your VoIP provider to input the correct account or ID.
pin: With H323 protocol used, while calling card is set, please type the
password of chosen card into this field.
Phone Settings
Note: Please check with your VoIP service provider for the phone settings.
Changing the settings without proper guidance may result the IP phone not
functioning.
phone number: With H323, MGCP and Net2phone protocol used, enter the
phone number provided by your VoIP provider. With SIP protocol used, enter
local ID here.
fwd number: Enter the phone number that will receiving forwarded calls into
this field.
Note: Some VoIP providers do not provide call forwarding function.
To Next Page
Loading...