1. 3.3V AGP card (essentially this means all AGP 1X and AGP 2X
cards) are not supported. Only 1.5V AGP cards essentially this
means any card that supports AGP 4X or higher) can be used in
this mainboard.
2. Please read the user guide before proceeding with your installation.
Serious damage may occur if the procedure is not followed
properly.
3. For immediate Technical questions, please visit
http://www.soyousa.com/support
and http://www.soyousa.com/kb.
4. Make sure you use a power supply for P4 motherboard (an ATX
12V power supply), preferably 350 watts or higher.
To Next Page
Need help?
General
