To Next PageTo Next Page
Need help?Do you have a question about the SOYO SY-K7VEM+ and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket Type | Socket A |
| Chipset | VIA KM133 |
| Memory Slots | 2 |
| Maximum Memory | 1 GB |
| Memory Type | SDRAM |
| AGP Slot | 1 x AGP 4X |
| PCI Slots | 3 |
| Floppy Port | 1 |
| PS/2 Ports | 2 |
| Serial Ports | 1 |
| Parallel Ports | 1 |
| Supported Processors | AMD Athlon, AMD Duron |
| Audio | AC'97 |
| LAN | 10/100Mbps Ethernet |
| USB Ports | 2 |
| Onboard Graphics | Yes (S3 Savage4) |
Details CPU support, settings, and expandability features of the motherboard.
Outlines crucial precautions to prevent damage from static discharge during handling.
Details the supported Socket 462 processor and its installation requirements.
Explains the features and capabilities of the VIA VT8361 and VT82C686B chipsets.
Describes the optional hardware monitor subsystem for system performance monitoring.
Lists the necessary hardware equipment and steps for motherboard installation.
Provides step-by-step instructions for installing the CPU into the Socket 462.
Explains how to install SDRAM memory modules into the motherboard's DIMM sockets.
Details connecting IDE, FDD, and front panel connectors on the motherboard.
Describes how to clear the CMOS memory using jumper JP5 for system reset.
Offers solutions for common first-start issues like no display or beep errors.
Allows configuration of basic system settings like date, time, and drives.
Configures advanced system features including boot order and cache settings.
Adjusts settings related to DRAM timing, AGP, and PCI bus performance.
Manages onboard devices like IDE, audio, serial, and parallel ports.
Monitors system temperature, voltage levels, and fan speed for health.
Loads conservative BIOS settings for system stability and recovery.
Instructions for inserting the driver CD and starting the setup program.
Guides on selecting and installing necessary drivers for the motherboard's components.
Details the process of selecting specific drivers and initiating their installation.
