SOYO SY-K7VEM+ - CPU Installation Guide

Hardware Installation
SY-K7VEM+
20
2-3.1 CPU Installation
Your SY-K7VEM+ motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 462 CPU
connector on the motherboard.
Mark your CPU Frequency:
Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
FSB 200MHz Athlon
750MHz (100 x 7.5) 800MHz (100 x 8.0) 850MHz (100 x 8.5) 900MHz (100 x 9.0)
950MHz (100 x 9.5) 1000MHz (100 x 10.0) 1.1GHz (100 x 11.0) 1.2GHz (100 x 12.0)
1.3GHz (100 x13.0)
FSB 200MHz Duron
600MHz (100 x 6.0) 650MHz (100 x 6.5) 700MHz (100 x 7.0) 750MHz (100 x 7.5)
800MHz (100 x 8.0) 850MHz (100 x 8.5) 900MHz (100 x 9.0) 950MHz (100 x 9.5)
FSB 266MHz Athlon
1GHz (133 x 7.5) 1.13GHz (133 x 8.5) 1.2GHz (133 x 9.0) 1.33GHz (133 x 10.0)
Follow these instructions to install your Socket 462 processor correctly.
1. Lift the socket handle up to a vertical position.