SP Systems SP2 - User Manual

OWNER/OPERATOR
MANUAL
BACKPACK SPRAYER
WARNING
WARNING
This sprayer is not designed
to be used with chlorine/bleach
(except SP2 - 5% household
only), acids of any kind,
corrosive products like caustic
soda, gasoline, materials
capable of generating heat, hot
fluids, explosive or highly
volatile products.
USE OF THESE AND OTHERS
EXPOSE USERS TO SERIOUS
INJURY AND EVEN DEATH.
Before using our products,
please read this manual
carefully to understand the
proper use of your unit.
US-1
TO PROLONG THE LIFE OF YOUR SPRAYER
To prolong the life of your sprayers, follow these three
simple steps:
1) Never leave chemicals in your sprayer overnight
2) Empty, Clean, and run water through your sprayer
including the hose and gun
3) Lubricate all moveable rubber pieces periodically
with Silicone Grease (o-rings, seals, piston cup (when
applicable), spindle in gun, etc)
INTERNATIO NAL
SPS
SP Systems International, Inc
1618 Stanford St, Suite C, Santa Monica, CA 90404
www.spsystemsinternational.com (800) 457-3440

Summary

Safety First and Warning Symbols

Understanding Warning Symbols

Safe Operation Guidelines

Working Conditions and Planning

Outlines conditions to avoid and guidance on planning work sessions for safe operation.

Essential Operational Safety Precautions

Details critical safety measures, warnings, and best practices for using the sprayer.

Setup and Assembly

Assembly Instructions

Pre-Operation Procedures

Lubrication and Breather Hole Care

Pre-Operation Checks and Steps

Sprayer Operation

Troubleshooting Guide

Addressing Pressurization and Leak Issues

Identifies causes and solutions for sprayer pressurization and leakage problems.

Resolving Trigger and Nozzle Problems

Solutions for a sticking spray gun trigger and a clogged nozzle.

SP Systems SP2 Specifications

General

Brand	SP Systems
Model	SP2
Category	Paint Sprayer
Language	English