SpacePak Solstice ILAHP48 - User Manual

ILHP2-0722
IN UNITED STATES: 260 NORTH ELM ST. WESTFIELD, MA 01085 800-465-8558 / FAX (413) 564-5815
IN CANADA: 7555 TRANMERE DRIVE, MISSISSAUGA, ONTARIO, L5S 1L4 (905) 670-5888 / FAX (905) 670-5782
SECTION 1: INTRODUCTION .......................................... 2
Hazard Denitions
Benets and Features
Specications
Performance
Typical System Diagram
SECTION 2: INSTALLATION ............................................ 6
Choose The Correct Heat Pump
Installation Location
Water Loop Connection
Electrical Connections
Control Input Connections
Control Output Connections
Dimensions
Required Clearances
SECTION 3: GLYCOL/WATER SYSTEM ......................... 10
SECTION 4: WIRING ........................................................ 12
Control Wiring Connection
Wiring Diagrams & Denitions
SECTION 5: REMOTE TOUCHSCREEN DISPLAY ........ 15
Overview of Remote Touch Screen
Electrical System Diagram
Display Windows and Functions
SECTION 6: PARAMETERS ............................................ 33
SECTION 7: TROUBLESHOOTING ................................. 50
SECTION 8: REPLACEMENT PARTS ............................. 52
WARRANTY ...................................................................... 53
MODEL ILAHP
INVERTER EXTREME
LOW AMBIENT
AIR-TO-WATER
HEAT PUMP
INSTALLATION AND
OPERATION MANUAL
Warranty
Registration

Summary

SECTION 1: INTRODUCTION

Hazard Definitions

Defines safety terms used throughout the manual.

Benefits and Features

Highlights key advantages and capabilities of the heat pump.

Specifications and Performance

Lists technical data, performance metrics, and system diagrams.

SECTION 2: INSTALLATION

Site Preparation and Clearances

Guidelines for selecting the installation location and ensuring proper clearances.

Water Loop and Electrical Connections

Instructions for plumbing, electrical wiring, and control system integration.

Unit Dimensions

Provides physical measurements and layout details of the heat pump unit.

SECTION 3: GLYCOL;WATER SYSTEM

System Design and Fluid Requirements

Recommendations for system design, flow rates, fluid types, and expansion tanks.

SECTION 4: WIRING

Control Wiring and Diagrams

Details on connecting external controls and includes wiring diagrams.

SECTION 5: REMOTE TOUCHSCREEN DISPLAY

Interface Overview and Operation

Explains the touchscreen interface, modes, temperature settings, and controls.

Settings and Parameter Management

Guide to accessing settings like Status, Clock, Factory, and parameter adjustments.

SECTION 6: PARAMETERS

System, Protect, and Fan Parameters

Configuration settings for system operation, protection, and fan control.

Compressor Parameters

Settings related to compressor speed, frequency, and modulation.

Defrost Parameters

Settings controlling defrost cycle operation and parameters.

Pump Parameters

Settings for pump operation logic and modes.

Temperature Parameters

Settings for temperature targets and compensation.

SECTION 7: TROUBLESHOOTING

ILAHP Error Codes and Solutions

Lists common error codes, their causes, and recommended solutions.

SECTION 8: REPLACEMENT PARTS

Replacement Parts List

Identifies part numbers and descriptions for replacement components.

SpacePak Solstice ILAHP48 Specifications

General

Brand	SpacePak
Model	Solstice ILAHP48
Category	Heat Pump
Language	English