SpacePak SIM-036 User Manual

IAW2-0620
IN UNITED STATES: 260 NORTH ELM ST. WESTFIELD, MA 01085 800-465-8558 / FAX (413) 564-5815
IN CANADA: 7555 TRANMERE DRIVE, MISSISSAUGA, ONTARIO, L5S 1L4 (905) 670-5888 / FAX (905) 670-5782
SECTION 1: PREFACE ..................................................... 2
SECTION 2: HAZARD DEFINITIONS .............................. 2
Warning ..................................................................................... 2
Attention .................................................................................... 2
SECTION 3: UNIT SPECIFICATION ................................ 3
Air Flow Direction ...................................................................... 3
Dimensions ............................................................................... 4
Specication Data ..................................................................... 5
Typical Piping ............................................................................ 5
SECTION 4: INSTALLATION ............................................ 6
Choosing the Heat Pump .......................................................... 6
Install Location/Clearances ...................................................... 6
Install Method ............................................................................ 6
Provisions for Glycol ................................................................. 7 & 8
Low Ambient Features .............................................................. 8
Pressure Test ............................................................................ 8
SECTION 5: WIRE CONTROLLER .................................. 9
Controller Details ...................................................................... 9-28
SECTION 6: WIRING AND DEFINITIONS ....................... 29
Board Layout. ............................................................................ 29-32
I/O Denitions. .......................................................................... 32-36
Parameter Denitions. .............................................................. 37- 41
INVERTER
AIR-TO-WATER
HEAT PUMP
INSTALLATION
MANUAL

SpacePak SIM-036 Specifications

General

Brand	SpacePak
Model	SIM-036
Category	Heat Pump
Language	English

Summary

SECTION 1: PREFACE

Read Before Proceeding

Important information and warnings before operating or maintaining the unit.

Benefits and Features

Highlights the key advantages and capabilities of the heat pump unit.

SECTION 2: HAZARD DEFINITIONS

Hazard Definitions

Explains the meaning of hazard symbols (Danger, Warning, Caution, Notice) used in the manual.

SECTION 3: UNIT SPECIFICATION

Unit Specification Details

Covers model types, dimensions, performance data, and system diagrams for SIM units.

SECTION 4: INSTALLATION

Installation Procedures

Covers choosing unit, location, method, water loop, electrical connections, and pre-operation checks.

Provisions for Glycol

Details on using glycol/water mixtures, including concentrations, pressure losses, and system volume requirements.

System Connections and Testing

Guides on SIM control wiring, low ambient cooling, and system pressure testing.

SECTION 5: WIRE CONTROLLER

Wire Controller Interface and Operation

Explains the wire controller's interface, display window, ports, and basic operation, including mode and timer settings.

Brightness Control and PCB Overview

Covers adjusting screen brightness and a technical overview of the PCB PC8002.

SECTION 6: WIRING AND DEFINITIONS

Wiring Diagrams and Definitions

Provides diagrams and definitions for electrical connections and components.

Parameter Lists

Details safety, defrost, fan, system control, and pump parameters.

SIM Error Codes

Lists and explains various error codes and their meanings.

Troubleshooting Chart

A guide to diagnosing and resolving common faults and errors based on symptoms.