6
ASSEMBLY
Fix the stem tube and lock the kickstand.
1
Fix the handlebar into the stem tube with the screws in the box.
2
Use the hexagon wrench in the box to tighten
the 6 screws on all 3 sides of the handlebars.
Tips: When installing the screws, please install all the 6 screws on
1/2 of the pole, and then tighten them separately to prevent the front
part from warping.
3
After the installation is complete, detect the scooter by switching
it on and o.
4
ESPAÑOL ITALIANOFRANÇAIS
DEUTSCH PORTUGUÊSNEDERLANDS ENGLISH
To Next Page
Loading...
