EasyManua.ls Logo

Sparke E-Slide - Scooter Functions

Sparke E-Slide
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Functions
The display on the handlebar will turn-on after powering the
kickscooter.
The display shows:
the speed during use of the electric kickscooter; speed is showed
in mph by default, but it can be switched to Km/h (1);
the gear: maximum speed with gear 1 is of around 10Km/h,
maximum speed with gear 2 is of around 15Km/h and maximum
speed with gear 3 is of around 25Km/h. Gears can be switched
pressing the power-button. For safety reason, the change of gear
can be done when the kickscooter is stopped only (2);
the icon for lights: front and rear lights must always be turned-on
during the use of the kickscooter (3);
Bluetooth icon: not valid for this model (4);
brake icon: it turns on when the brake lever is used (the light of