SPARKELEC SP-3001FE/DA-D40-WH - User Manual

INSTALLATION AND OPERATING INSTRUCTIONS
Recessed L E D Emergency Light(SP3001F E/DA-D40/D63-W H/B K)
Series product appearance unified. The functions of each MODEL is similar.
Please refer to the following table.
Battery type:
:6.4V 1500/3000mAhLiFePO4
Max Ambient temperature:60℃
Installed date:
Manufactured date:
Used date:
APPLI C AT I O N
TECHN I C AL DATA
TECHN I C AL INFORM ATI O N
PLU G IN B AT TERY BEFORE CONNE CTING 240V PO WER S UPPLY
During Normal operating conditions, this LED Emergency light should be connected to a Permanent Active
Circuit (not a switched active circuit). When mains power supply is available, AC provides power and charges
the built-in rechargeable batteries. The LE D Chip is always “unlit.” The LED Chip will only “light up” when
there is a cut to the mains power supply.
220-240V, 50Hz
2.5/5w
16/24 Hours
2/3 Hours
NON-maintained operation
Manual Test Switch & LED Indicator
0℃ to 40℃
LiFePO4 Battery
Recessed
IP20
Plastic
C0:D40/63 C90:D40/63
1. Input voltage:
2. DC power consumption:
3. Charge time:
4. Emergency time:
5. Operation:
6. Function:
7. Working temperature:
8. Battery:
9. Mounting:
10. I P rating:
11. Material:
12.Classification:
85
20
SP3001FE/DA-xx-yy series
Charging mode: Max.4 W 220-240 V 50/60 Hz
Emergency lighting mode: 6.4 V battery,2.5/5W
Battery supply: 1500/3000 mAh, 6.4 V d.c. .LiFePO4
Cl. II, IP20, ta 0 - +40℃, Non-maintained, 2 hours duration
The ”xx” in the type designation can be D40 or D63,
indicating different emergency luminaire:
xx=D40
xx=D63
The “yy” can be “WH” or “BK”, indicating the color of housing.
yy = WH: white; yy = BK: black
-1-
Output lumen
Model No.
200lm
SP-3001 FE/ D A-D 40 -WH
200lm
Input Voltage
Charge
Time
Discharge
Time
Operation
Emergency Mode
Battery
DC Power
Charging mode
Classfication
16/24 Hours
2/3 Hours
NON-Maintaine d
2.5W
220-240V 50/60Hz
4W
D40
16/24 Hours
2/3 Hours
LiFe PO4, 6.4V 1.5 Ah
NON-Maintaine d
2.5W
220-240V 50/60Hz
4W
D40
LiFe PO4, 6.4V 1.5 Ah
SP-3001 FE/ D A-D 40 -BK
400lm
SP-3001 FE/ D A-D 63 -WH
400lm
16/24 Hours
2/3 Hours
NON-Maintaine d
5W
220-240V 50/60Hz
4W
D63
16/24 Hours
2/3 Hours
LiFe PO4, 6.4V 3Ah
NON-Maintaine d
5W
220-240V 50/60Hz
4W
D63
LiFe PO4, 6.4V 3Ah
SP-3001 FE/ D A-D 63 -BK
13.SP3001-FE/DA FE: Standard ; DA: with DALI function

Summary

Installation and Operating Instructions

Application

Explains the primary use and operational principle of the LED emergency light.

Technical Data

Details key technical specifications, including voltage, power consumption, and battery type.

Plug In Battery Before Connecting 240 V Power Supply

Crucial pre-installation step for connecting the battery before mains power.

Technical Information

Provides a detailed table comparing different models and their technical specifications.

Safety and Precautions

Safety Warnings

Highlights safety aspects, including mains power dependency and cable replacement.

Precautions

Advises that installation must be done by a licensed electrician.

Installation Instructions

Dia-cut Solutions

Details two dia-cut solutions for installation with specific opening sizes.

Installation Steps

Provides a step-by-step guide for fitting the luminaire into the ceiling.

Troubleshooting and Maintenance

Fault Finding Guide

Lists common faults, possible causes, and troubleshooting steps for the indicator or lamp.

Testing Precautions

Explains requirements for charging and manual discharge testing as per standards.

Maintenance and Battery Life

Covers battery replacement, lifespan, and warranty implications of improper use.

Australian & New Zealand Classifications

Luminaire Classification System

Defines classifications like Non-IC, Do-not-cover, CA90, CA135, IC, and IC-4.

Clearance Requirements

Specifies required clearance distances from structural members to prevent fire risk.

SPARKELEC SP-3001FE/DA-D40-WH Specifications