SPARKFUN CCS811 ARDUINO LIBRARY
SPARKFUN BME280 ARDUINO LIBRARY
SPARKFUN APDS-9301 ARDUINO LIBRARY
Note: This example assumes you are using the latest version of the
Arduino IDE on your desktop. If this is your first time using Arduino,
please review our tutorial on installing the Arduino IDE. If you have not
previously installed an Arduino library, please check out our
installation guide.
If you have not already, make sure to setup your own weather station with
Wunderground. You will need to fill out a form and pick a username &
password in order to receive a station ID. Sensor data from the ESP32
Thing and the ESP32 Environment Sensor Shield can then be pushed to
Wunderground’s server.
Here we present some example code for the ESP32 Environment Sensor
Shield. This code reads all of the sensors, prints the resulting data to the
serial port once per second, then posts some of the more germane data to
Weather Underground once per minute.
Page 1
of 20
To Next Page
Loading...