sparkfun ESP32 - Page 2

The ESP32 Environment Sensor Shield comes with connections for our
weather station. You may also wish to add a soil moisture sensor, which
you’ll need two three-position 3.5mm screw terminals and enough wire to
connect the sensor to the board.
SparkFun ESP32 Thin
g

DEV-13907
Break Away Headers -
Straight
 PRT-00116
Female Headers

PRT-00115
Weather Meters

SEN-08942
SparkFun Soil Moisture
Sensor
 SEN-13322
Screw Terminals 3.5mm
Pitch (3-Pin
)

PRT-08235
Page 2 of 20