sparkfun Inventor's Kit - Select Board and Serial Device; Select Your Board; Select Serial Port (Windows); Select Serial Port (Mac OS)

9 : INTRO
dit Sketch Tools Help
Auto Format
Archive Sketch
Fix Encoding and Reload
Serial Monitor
Serial Plotter
Board: “Arduino/Genuino Uno”
Port
Get Board Info
Programmer: “AVRISPmkII”
Burn Bootlader
Serial Ports
/dev/cu.usbserialDNO18JWS
dit Sketch Tools Help
Auto Format
Archive Sketch
Fix Encoding and Reload
Serial Monitor
Serial Plotter
Board: “Arduino/Genuino Uno”
Port
Get Board Info
Programmer: “AVRISPmkII”
Burn Bootlader
Serial Ports
COM1
COM2
COM51(Arduino/Genuino UNO)
6. SELECT YOUR BOARD AND SERIAL DEVICE
NOTE: Your SparkFun RedBoard and the Arduino/Genuino UNO are
interchangeable, but you won’t find the RedBoard listed in the Arduino
software. Select “ARDUINO/GENUINO UNO” instead.
dit Sketch Tools Help
Auto Format
Archive Sketch
Fix Encoding and Reload
Serial Monitor
Serial Plotter
Board: “Arduino/Genuino Uno”
Port
Get Board Info
Boards Manager…
TeensyDuino
Teensy 3.6
Teensy 3.5
Teensy 3.2/3.1
Teensy 3.0
Teensy LC
Teensy++ 2.0
Teensy 2.0
Arduino AVR Boards
Arduino/Genuino Uno
Arduino Duemilanove or Diecimila
Arduino Nano
SELECT YOUR BOARD
Tools > Board > Arduino/Genuino UNO
SELECT YOUR PORT (WINDOWS)
Tools > Port > COM#(Arduino/Genuino UNO)
SELECT YOUR PORT (MAC OS)
Tools > Port > /dev/cu.usbserialXXXXXXXX
SELECT YOUR PORT (LINUX)
Distribution-specific serial device setup instructions can be found HERE:
http://arduino.cc/playground/learning/linux