sparkfun NEO-M9N - Page 5

Heads up! If you are using the RedBoard without a Qwiic connector, we recommend getting the Qwiic
Shield for Arduino.
Suggested Reading
If you aren't familiar with the Qwiic system, we recommend reading here for an overview.
Qwiic Connect System
We would also recommend taking a look at the following tutorials if you aren't familiar with them.
Qwiic Cable - 200mm
 PRT-14428
Qwiic Cable - 50mm
 PRT-14426
SparkFun Qwiic Shield for Arduino
 DEV-14352