Required Materials
To follow along with this tutorial, you will need the following materials at a minimum. You may not need everything
though depending on what you have. Add it to your cart, read through the guide, and adjust the cart as necessary.
Tools
You will need a soldering iron, solder, and general soldering accessories for a secure connection when using the
plated through hole pads.
SparkFun Qwiic Pro Micro - USB-C
(ATmega32U4)
DEV-15795
Reversible USB A to C Cable - 0.8m
CAB-15425
Soldering Iron - 60W (Adjustable Temperature)
TOL-14456
Solder Lead Free - 15-gram Tube
TOL-09163
To Next Page
Loading...