SPARTAN sport 1371 - User Manual

1371 snow bob
INSTRUCTION
Tapping Screw:
First of all ,we need to use two
specification screws(a & b).
Specification“a”is
M4.2×16mm,
specification“b”is
M4.2×10mm.
es gibt 2 verschiedene Schrauben:
a 4.2 x 16mm
b 4.2 x 10mm
1. Using six specification “a”
screws to fasten A and B. see photo 1
verwenden Sie 6 Scrauben “a” um die Teile A + B zu fixieren (siehe
Photo 1)
a
M 4.2×16mm
b
M 4.2×10mm

Summary

Snow Bob Assembly Instructions

Tapping Screw Specifications

Details the specifications for tapping screws 'a' (M 4.2x16mm) and 'b' (M 4.2x10mm).

Step 1: Fastening Parts A and B

Uses six 'a' specification screws to fasten parts A and B together.

Step 2: Attaching Handle to Orange Body

Connects the handle to the orange body (C) using eight 'a' specification screws.

Step 3: Fastening Parts C and D

Joins parts C and D using sixteen 'a' and one 'b' specification screws.

Screw Specification Accuracy Remark

Emphasizes the importance of using the correct screw specifications for assembly.

SPARTAN sport 1371 Specifications