Do you have a question about the SPAUN SMS 9807+ NF and is the answer not in the manual?
Covers device intended use, installation by competent persons, indoor use, and avoiding flammable materials.
Details earthing requirements and termination of unused subscriber ports with 75 Ohm resistors.
Describes the power supply voltage range and LNB feeding current capacity.
Explains the standby mode and selective switching of LNB power.
Details the number of subscriber outputs and SAT/terrestrial inputs.
Specifies tap loss for terrestrial and tap attenuation for SAT IF.
Provides maximum output level and SAT input level specifications.
Details input power, standby power, LNB current, and operating temperature.
Illustrates the physical connections for System A and System B, including GND, 18V, 22kHz.
Lists key technical specifications like tap loss, output level, and power supply details.