SPC 3604N - Managing Incoming Numbers; Reviewing, Calling Back, and Deleting

5
 From Speakerphone
1. Press key
2. When hearing the dialing tone, dial the desired number.
3. The unit start to time conversation after 6 seconds,
4. After finished, press key again.
 Pre-dialing function
1. In on-hook state
2. Dial the desired number, if any mistake use key to edit.
3. Press key or pick up the handset, the number will be auto-dialed out.
 Redial
1. Pick up handset or press key,
2. Press RLL key, the last dialed number is dialed again
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
 Reviewing
In on-hook state or off-hook state(pick up handset), press /+ or /– key to review the desired
number frontward or backwards. When all numbers are reviewed, LCD displays --END--.
 Deleting
In on-hook state, when review the desired number, press key, the number is deleted. Press
and hold key for 3 seconds, all the incoming messages are deleted.
 Calling back
In on-hook state:
1. Review to the desired number, press key or pick up the handset, the number is dialed out,
or
2. Press RLL key to dial out the number.
3. If the long distance code is set, call back the long distance call number as follows. When
review to the desired long distance call number, press RLL key twice, the number will be
dialed out adding the long distance code before it automatically.
4. If the PABX code is set, when review to the desired number, press RLL key, the telephone
will add the PABX code before the number automatically. It will dial the PABX code first and
then after a 2 second pause and then dial the number.
In off-hook state(pick up handset):
Pick up handset, press /+ or /– key to review the desired number, then press RLL key to dial
out the number
PREVENT FSK MESSAGE AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, the user also can prevent
it from auto-adjust real time.