25
EN
The device will carry out an automatic search of available
wireless networks and you will see the list to the left.
Choose the network that you would like to connect to by
clicking on it. If it is a secure network the device will ask
you for a network password.
The device will then try to connect to the network and,
if this is possible, “Connecting to Wi-Fi network” will be
displayed below the network. You will now be able to
connect to the Internet, check your e-mail and use any
application or utility that requires a Wi-Fi connection.
You can also connect your SPC Alien through Ethernet. To
do this, connect an Ethernet cable from your router to the
Ethernet RJ45 connector (2) of your SPC Alien and select
the “Ethernet” option from the “Settings” section. You will
automatically have an Internet connection.
To Next Page
Loading...