26
MICRO SD CARD AND USB DEVICES
INSTALLATION
Introduce the microSD memory card (up to 32GB) in the
card reader slot (5) in such a way that the card’s contacts
remains in the correct position. To remove the card, simply
push it in using your nails and then pull it out. Connect the
external USB device to one of the USB ports (6 and 8) of
the SPC Alien.
This device is compatible with wireless mice and
keyboards*. Connect the USB receiver of the wireless
device to one of the available USB ports.
NOTE: The USB card and memory (not included) have to be
formatted in FAT32.
*NOTE: Consult the minimum compatibilities and requirements of
the wireless mouse or keyboard that is to be connected.
To Next Page
Loading...