17
EN
The driver automatically loads if you are using the
Windows XP/VISTA/7/8, MAC (10.6 or lower), Linux
operating system.
The battery will start charging, the blue light indicator
will blink. Charge the battery for 2 hours to ensure a
maximum usage time and to lengthen its useful life.
Disconnect the player when the charging time has been
reached.
You can also charge the player’s battery using a charger,
with USB, 5V 500mA output.
NOTE: To charge the player correctly, connect the USB cable
directly to your computer’s USB port (not via a hub).
CONNECTION TO THE COMPUTER
Connect the player to a computer that uses the Windows
XP/VISTA/7/8, Linux, MAC (10.6 or lower) Operating
System. The computer will automatically recognise the
device.
NOTE: Connect completely the USB cable inside the earphones
connector of the player before connecting the cable USB to the
PC. If you don’t follow these steps, it could occur a short-circuit
To Next Page
Loading...