SPC BREEZE TOWER - Page 27

27
EN
You can use the USB connector to charge your Bluetooth
device, for this, connect the USB charger (not included) to
the speaker, and the other extreme to the device. Make sure
that the speaker is switched on.
SD MODE
1. Insert an SD card in the SD card reader in the speaker to
playMP3andWAVmusicles.
2. Press the button to switch on the device. Press the
MODE button in the speaker or in the remote control until
the SD LED indicator switches on.
NOTE: The les will be reproduced in the order that were saved in
the SD card.
3. Press the button to pause the music, press it again
to resume the reproduction.
4. Press the button to go forward to the next saved
track. Press the button to go backward the previous
track.