SPC BREEZE TOWER - Setting up the Device

24
SETTING UP THE DEVICE
1. Press the button to switch ON the speaker. A green
LED indicator will switch on in the speaker indicating that
is ON.
2. Press the MODE button to toggle between the different
sources available in the device (SD/BLUETOOTH/RADIO/
AUX).
3. Press the VOL +/VOL – buttons in the speaker to
increase or reduce the volume. You can make this action
withtheremotecontrolpressingthebuttons+/-.
4.PresstheEQbuttontochoosethedesiredconguration.
5. Press the button in the remote control to mute the
device. Press it again to activate the sound of the speaker.
NOTE: The product doesn’t come fully assembled. For this, screw
the speaker to the wooden base with the provided washers and
screws.