EasyManua.ls Logo

SPCO VM - Page 2

SPCO VM
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EU Declaration of conformity
according to the Low Voltage Directive 2014/35/EU
and the Machinery Directive 2006/42/EC
and Electromagnetic Directive 2014/30/EU
For the following equipment:
Product: Pump
Trademark: Vertical Multistage Pump
Type Designation: VM, VMC, VMN
Manufacture’s Name: Swiss Pump Company AG
Manufacture’s Address: Moosweg 36, CH-3645,
Thun-Gwatt -Switzerland
is herewith confirmed to comply with the requirements set out in the Directive 2014/35/EU
And the Machinery Directive 2006/42/EC and Electromagnetic Directive 2014/30/EU.
For the evaluation of the compliance with this Directives, the following standards are applied:
EN ISO 12100:2010
EN ISO 13857:2008
EN 60204-1:2006
EN 809:1998
EN 6100-6-2:2005
EN 6100-6-4:2007
EN 60335-1:2012
EN 953:1997
EN 60335-2-41
Responsible for making this declaration is the:
Manufacture Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Swiss Pump Company AG
Company Address: Moosweg 36, CH-3645,
Thun-Gwatt -Switzerland
Person responsible for making this declaration
Name, Surname: Michael Bähler
Position/Title: production Manager
(Place) (Date) (Company stamp and legal signature)
Switzerland 12/09/2019
Approvals