Need help?Do you have a question about the SpeakerCraft AIM LCR3 Five and is the answer not in the manual?
Speaker Specifications| tweeter | Pivoting 1" Silk Dome |
|---|---|
| woofers | Two 3" Injection Molded Graphite Cones |
| impedance | 8 ohms compatible |
| sensitivity | 85dB 1W/1m |
| frequency response | 80Hz - 20kHz |
| power handling | 60 watts (undistorted) |
Dimensions| cut out dimensions | 4 3⁄4" x 9" (120.650mm x 228.600mm) |
|---|---|
| dimensions | 5 3⁄4" x 10" x 2 7⁄8" (146.050mm x 254.000mm x 73.025mm) |
Speaker Specifications| tweeter | Pivoting 1" Aluminum Dome |
|---|---|
| woofers | Two 3" Aluminum Cones |
| impedance | 8 ohms compatible |
| sensitivity | 86dB 1W/1m |
| frequency response | 78Hz - 20kHz |
| power handling | 60 watts (undistorted) |
Dimensions| cut out dimensions | 4 3⁄4" x 9" (120.650mm x 228.600mm) |
|---|---|
| dimensions | 5 3⁄4" x 10" x 2 7⁄8" (146.050mm x 254.000mm x 73.025mm) |
Speaker Specifications| tweeter | Pivoting 1" Aluminum Magnesium Dome |
|---|---|
| woofers | Two 3" Kevlar Cones |
| impedance | 8 ohms compatible |
| sensitivity | 86dB 1W/1m |
| frequency response | 60Hz - 20kHz |
| power handling | 60 watts (undistorted) |
Dimensions| cut out dimensions | 4 3⁄4" x 9" (120.650mm x 228.600mm) |
|---|---|
| dimensions | 5 3⁄4" x 10" x 2 7⁄8" (146.050mm x 254.000mm x 73.025mm) |
Introduction to the AIM LCR3 Home Cinema Speakers and their features.
Optimal positioning for center, front left, and right channel configurations.
Important factors before wall installation, checking for obstructions.
Procedures for preparing new and finished walls for speaker mounting.
Step-by-step guide for mounting the speakers into the wall cavity.
How to adjust baffles and tweeters for desired sound directionality.
Guidelines for painting speaker grilles without compromising sound quality.
Detailed technical specs for AIM LCR3 Five, Three, and One models.
Details on warranty coverage, exclusions, and claims process.
To Next Page
