Need help?Do you have a question about the SpeakerCraft BassX-10 and is the answer not in the manual?
Warning to reduce the risk of electric shock by not removing the cover.
Explanation of symbols indicating dangerous voltage and important operating instructions.
Covers instructions for operation, water, heat, ventilation, cleaning, and servicing.
Applies to usage in USA, Canada, or areas approved for usage.
Provides accurate bass and connects to various audio systems and receivers.
Advice on positioning for optimal performance, ventilation, and avoiding hazards.
Connect receiver or amplifier pre-outputs to subwoofer line level inputs.
Forward input signals to other components or amplifiers via output sections.
Instructions for connecting speaker wires from receiver outputs to subwoofer inputs.
Turns the subwoofer on or off, indicated by green (on) or red (off) light.
Details on Volume, Boost, Frequency, and Phase controls for system blending.
Addresses issues like no sound, hum, buzzing, or subwoofer not turning on.
Details Woofer, Impedance, Power Rating, and Dimensions for BassX-10 and BassX-12.
Covers defects in materials and workmanship for two years from purchase.
Speaker Specifications| woofer size | 10 inch |
|---|---|
| impedance | 4 Ohm |
| power rating | 150 Watts |
Weight and Dimensions| dimensions | 14[3]⁄8 inch x 14[3]⁄8 inch x 14[3]⁄8 inch |
|---|
Speaker Specifications| woofer size | 12 inch |
|---|---|
| impedance | 4 Ohm |
| power rating | 250 Watts |
Weight and Dimensions| dimensions | 17[1]⁄2 inch x 17[1]⁄2 inch x 17[1]⁄2 inch |
|---|
To Next Page
