Need help?Do you have a question about the SpeakerCraft SC Pro Commercial 8 and is the answer not in the manual?
Identify potential obstructions like joists or wiring before speaker placement.
Use the provided template to outline the cutout hole on the ceiling.
Cut the ceiling along the marked outline and pull wiring through.
Insert and expand the S-Bracket into the ceiling cutout for support.
Use knockouts in the J-Box for feeding wires in or out for speaker connections.
Set the transformer tap to match the system to prevent damage.
Connect speaker wires using stripped wires, spade plugs, or screw-down terminals.
Insert speaker into cutout, tighten screws to engage mounting feet.
Connect the seismic tab to a secondary support point for safety.
Firmly push the grille into the speaker baffle after installation.
Clean speakers, mask, and apply paint coats for desired finish.
Remove grille, spray paint lightly, then reassemble with grille material.
Detailed technical specifications for the SC Pro Commercial 8 in-ceiling speaker.
Detailed technical specifications for the SC Pro Commercial 6 in-ceiling speaker.
Detailed technical specifications for the SC Pro Commercial 4 in-ceiling speaker.
Detailed technical specifications for the SC Pro Commercial Sub 8 in-ceiling speaker.
General| Brand | SpeakerCraft |
|---|---|
| Model | SC Pro Commercial 8 |
| Category | Speaker System |
| Language | English |
To Next Page
