To Next Page
R
Richard WardAug 9, 2025
Why Spear & Jackson SCBV36 won't start?
- VveronicalynchAug 10, 2025
Your Spear & Jackson Blower may not start due to several reasons: * The batteries might not be inserted correctly or could be flat. In this case, charge the batteries and ensure they are properly inserted into the compartment. * The On/Off switch might be in the OFF position. To resolve this, slide the power switch to the ON position and select your desired speed. * The tubes or collection bag may not be installed correctly. Try removing and reinstalling the tubes and collection bag, making sure they are securely locked in place. * The intake cover may not be closed. Ensure that the cover is fully closed and locked.
General
