SPECIALTHING INTERNATIONAL HP-52RBJ User Manual

MODEL NUMBER: HP-52RBJ
DIGITAL AM / FM STEREO HEADPHONE RADIO WITH BLUETOOTH
& AUX-IN JACK
USER MANUAL
When the headset is turned on, all settings are resumed to the last (previous) settings.
For U.S.A. users, 10 kHz is recommended.
 To select 9 or 10 kHz for AM, the procedure is as shown here below:
 Keep unit in OFF position.
 During time setting mode, press button for 2 seconds.
 9 kHz will be shown on the display.
 Press Scan
or to select 10 kHz.
 After selection, turn on the headset to activate the Radio.
- Insert Battery
 Turn off the headset. Open the battery door, insert 3 pieces AAA sized batteries. Close the battery
door.
- Time Setting
 Turn off the headset by turning the volume knob in anti clockwise direction. Press
button or to
select 12 or 24-hours mode.
 Turn off the headset by turning the volume knob in anti clockwise direction. Press MODE button.
When time is flashing, press ▲ or ▼ to adjust the hour, then press MODE to confirm. Then adjust
minutes, apply same procedure as above, then press MODE button to confirm the setting.
 Radio Mode
 Turn on the headset by tuning the Power ON/OFF Knob (which combines with Volume Control) in
clockwise direction.
 Tap quickly the button to toggle between FM/AM/BT Setting. Set to AM or FM to listen to
radio.
 Manual search: Press ▲ or ▼ (scan) buttons step by step until it reaches your desired station.
 Auto Scan: Press ▲ or ▼ (scan) buttons for 2 seconds, then release the button when seeking starts.

SPECIALTHING INTERNATIONAL HP-52RBJ Specifications

General

Brand	SPECIALTHING INTERNATIONAL
Model	HP-52RBJ
Category	Radio
Language	English

Summary

AM Frequency Selection

Insert Battery

Time Setting

Radio Mode Operation

Manual Station Search

Search for radio stations by pressing the scan buttons step by step.

Automatic Station Scan

Initiate a scan for radio stations by holding the scan buttons for 2 seconds.

Preset Station Management

Save stations to memory slots by holding MODE and using directional buttons.

Bluetooth Mode

Bluetooth and Radio Mode

Auxiliary Jack Operation

Bluetooth and Auxiliary Jack Operation

Safety and Precautions

Environmental and Usage Precautions

Avoid high temperature, humidity, direct sunlight, and certain chemicals.

Battery and Component Warnings

Do not expose batteries to excessive heat; headband is non-replaceable.

FCC Compliance Statement

Device complies with Part 15 of FCC Rules, limits for Class B digital device.

Interference Correction Measures

Guidance on correcting radio/TV interference by repositioning or separating devices.

Technical Specifications