EasyManua.ls Logo

Speck pumpen VZ 50 User Manual

Default Icon
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Speck Pumpen Vakuumtechnik GmbH
zertifiziert: DIN EN ISO 9001
1
Supplementary Operating Instructions
for Explosion Protection for Liquid Ring Compressors
These supplementary operating instructions are an addendum to the operating instructions. The
operating instructions for the product are to be observed without fail.
ATTENTION
Any warranty claims including claims for damages cease in case of non-observance.
The liquid-ring compressors are suitable for the intended use for operation in an environment prone to
explosion as well as for the conveying of explosive gases and vapour mixtures, which can also contain
hydrogen.
According to Directive 94/9/EC, the compressors conform to the equipment group II and to the following
categories depending on the type series and on the measurement and safety technology:
Outside the compressor:
category according to
EN 13463
The media of the environment at the site of installation belong
according to EN 13463-1 to the
Temperature classes Explosion groups further details
For all type series
2G T1, T2, T3 or T4 IIA or IIB or IIC
2D
maximum surface temperature (cf 3)
Inside the compressor:
category according to
EN 13463
The conveyed media belong
according to EN 13463-1 to the
Temperature classes Explosion groups further details
For all type series
2G T1, T2, T3 or T4 IIA or IIB
2D
maximum surface temperature (cf 3)
Inside the compressor:
category according to
EN 13463
The conveyed media belong
according to EN 13463-1 to the
Temperature classes Explosion groups further details
for VU 20 to VU 1600, VH 20 to VH 1600 and VZ 110 to VZ 180 only
1G T1, T2, T3 or T4 IIA or IIB Medium contains hydrogen
or
1G T1, T2, T3 or T4 IIA or IIB
The authorizations for the corresponding equipment categories and media apply in each case only in
connection with the measurement-, control- and process-technology necessary for them. The
authorization ceases with a restriction of the functionality of the prescribed safety technology, a modified
operational mode or the non-compliance with the required maintenance procedures. Maintenance work
may only be performed by technically trained personnel.
Question and Answer IconNeed help?

Do you have a question about the Speck pumpen VZ 50 and is the answer not in the manual?

Speck pumpen VZ 50 Specifications

General IconGeneral
BrandSpeck pumpen
ModelVZ 50
CategoryWater Pump
LanguageEnglish

Summary

Operating Thresholds

Motor Allocation and Torque Limits

Temperature Limits and Classes

Explosion Protection Identification

Permissible Operation Modes

Hydrogen Gas Inertisation Procedures

MCR Technology for Explosion Protection

Required MCR Equipment Overview

Lists essential measuring, control, and regulation equipment for safe operation.

MCR Equipment: Category 1G/2G/D (Inside/Outside)

Specifies MCR components for Category 1G (inside) and 2G/D (outside) equipment.

MCR Equipment: Category 2G/D (Inside/Outside)

Specifies MCR components for Category 2G/D (inside and outside) equipment.

MCR Equipment: Category 2G/D (Outside)

Specifies MCR components for Category 2G/D (outside) equipment.

Additional MCR for Double-Action Slide Gaskets

Lists additional MCR components for compressors with double-action slide ring gaskets.

Startup, Operation, and Shutdown Procedures

Covers essential procedures for starting, operating, and shutting down the compressor.

General Operational Guidelines

Outlines general procedural methods and safety considerations for compressor operation.

Operating Liquid Supply Requirements

Details requirements for ensuring adequate operating liquid supply for compressor function.

Hydrogen Inertisation During Operation

Describes the inertisation process when conveying hydrogen-containing gases and vapours.

MCR System Control Flowcharts

Presents MCR logic diagrams to illustrate operational sequences and checks.

MCR Flowchart: Category 1G (Inside) / 2G/D (Outside)

MCR flowchart for Category 1G (inside) and 2G/D (outside) compressors.

MCR Flowchart: Category 2G/D (Inside/Outside)

MCR flowchart for Category 2G (inside) and 2G/D (outside) compressors.

MCR Flowchart: Category 2G (Outside)

MCR flowchart for Category 2G (outside) compressors.

Compressor Maintenance Schedule

Related product manuals