Specktron Intelligent Series User Manual (English)

Questions and Answers:

A
Ashley MooreAug 2, 2025
Why is my Specktron Intelligent Whiteboard not working?
- B
  Brett SmithAug 2, 2025
  If your Specktron Whiteboard isn't working, several factors could be the cause. First, ensure the service program is running; if not, start it. If the program isn't installed, install it. Verify the USB cable connects the whiteboard to the computer. Also, check for obstructions on the whiteboard surface that may interfere with its self-checking process. A drive malfunction may also be the reason, so try uninstalling and reinstalling the drive. Finally, inaccurate calibration can cause issues. Recalibrate the device.
D
Debbie JohnstonAug 7, 2025
Why is the pen working slowly on my Specktron Intelligent?
- W
  winterselizabethAug 7, 2025
  If your pen is working with your Specktron Whiteboard but the reactions are slow, it could be due to conflicts with anti-virus software. Try exiting any anti-virus programs you're running. Another reason could be too many programs running simultaneously; close any unnecessary software. It's also possible that your computer's hardware configuration is too low, in which case you should contact a professional to upgrade your computer hardware.
A
allen94Aug 12, 2025
What to do if the pen tray is not working on Specktron Intelligent Whiteboard?
- J
  Jessica GrahamAug 12, 2025
  If the pen tray on your Specktron Whiteboard isn't working normally, start by checking for any obstructions or dust in the pen tray slots and remove them. Also, ensure the pen tray is securely attached to the whiteboard. Detach and reattach the pen tray, then firmly screw it onto the bottom.
D
Donna JeffersonAug 17, 2025
How to fix pen deviations on Specktron Intelligent Whiteboard?
- M
  Michael MooreAug 17, 2025
  If your pen is working but there are deviations on your Specktron Whiteboard, it is likely due to inaccurate calibration. Recalibrate the whiteboard correctly. Another potential cause is projection distortion, so adjust the projector accordingly.