Need help?Do you have a question about the Speco PL200M and is the answer not in the manual?
Power| power output | 50W RMS @ 4Ω per zone for 200W total |
|---|---|
| power supply | Selectable 115V/60Hz or 230V/50Hz |
Audio| frequency response | 60Hz – 17KHz +/- 3Db |
|---|---|
| inputs | 3 XLR / ¼” combination inputs with phantom, mic or line level selection switch / 2 RCA inputs |
| outputs | 4 sets of 4/8/25V/70V/100V outputs |
Weight and Dimensions| dimensions | 19” x 12.2” x 5.2” |
|---|---|
| weight | 33.3 lbs. |
Instruction to read the manual carefully before first use and copyright information.
Explanation of safety symbols, warnings, and precautions for power supply, connections, and grounding.
Key safety instructions regarding power cord, cleaning, and servicing to ensure safe operation.
Setting AC voltage and connecting monitor line out and 1W8 monitor outputs.
Details on priority terminals, AUX paging input with voice priority function, and LINE IN inputs.
Zone selection via dip switches and volume adjustment for the 'Tel Paging' source.
Technical details including output power, frequency response, distortion, and signal-to-noise ratio.
Explanation of gain, high/low tone controls, mute functions, volume knobs, and zone selectors.
Controls for Zone 1 volume, LED VU-meter, MONITOR selector, and power indicator (PL).
Operation of the power switch and description of the intelligent cooling fan system.
Guidelines for proper installation, ventilation, and connecting to the AC power supply.
Details on mono MIC/LINE channels, sensitivity settings, and phantom power for XLR inputs.
Information on balanced/unbalanced line outputs and power amplifier outputs for speakers.
To Next Page
