POINT CTRL
VIRTUAL REALITY CONTROL DEVICE
SPEC TECH DESIGN MANUFACTURING AND TRAINING
FCU OPERATION - LED BRIGHTNESS ADJUSTMENT
ENTER SET-UP MODE SET BRIGHTNESS
IR LED
Step (2)
Press and Hold for
1Second
IRLED will Slowly din
and then get bright
again confirming you
are in LED Brightness
Adjustment Mode
Step (3)
IR LED will display currently
set brightness
Step
(3A)
Press to
Brighten
LED
Step(1)
Press and Hold FCU BTN 2
before and while turning on
FCU
LED Brightness can be
dimmed to save battery
life but is does slightly
affect tracking resolution
Step
(3B)
Press to
Dim LED
Step (4)
Press to
Save
Brightness
setting
12
To Next Page
Loading...