Need help?Do you have a question about the Spectra Logic T-Series Spectra T950 and is the answer not in the manual?
General| Brand | Spectra Logic |
|---|---|
| Model | T-Series Spectra T950 |
| Category | Storage |
| Language | English |
Explains logical division of the library into virtual libraries.
Details the Quad Interface Processors and their role in connectivity.
Details the addition of RXT drives and media for disk storage.
Describes logical grouping of media within partitions.
Covers user security and the Library Controller interface.
Details how to configure library partitions using QIP-attached drives.
Illustrates partition configuration with direct-attached drives.
Provides a checklist for configuring partitions.
Discusses capacity on demand and hardware upgrades.
Instructions for setting up and powering on the library.
Steps to turn on the library and the power-on sequence.
Steps to log into the Library Controller for the first time.
Guide to understanding the Library Controller interface and its components.
Steps to enable purchased library options using activation keys.
Instructions for setting up automatic support ticket creation and notification.
Steps to set up email recipients for AutoSupport notifications.
Detailed steps for creating user profiles for AutoSupport.
Fields for entering company details in AutoSupport profiles.
Fields for entering contact person details in AutoSupport profiles.
Fields for library system and mail recipient details in AutoSupport.
Instructions for modifying existing AutoSupport profiles.
Steps to remove existing AutoSupport profiles.
Covers creating and updating support tickets via AutoSupport.
Detailed procedure for opening a new support ticket.
Screen for specifying ticket type and describing the problem.
Summary screen for temporarily changing contact information.
Steps to update an existing support ticket with new information.
Final screen to review and submit the updated support ticket.
Step-by-step guide to creating a new partition in the library.
Procedures for modifying existing library partitions.
Steps to remove a library partition.
Automatic partition configuration upon initial library startup.
Initial settings required for creating a new partition.
Screen to define partition name and media type.
Detailed steps for configuring a partition using Gigabit Ethernet.
Selection of the Ethernet protocol for the partition.
Configuration of iSCSI settings for exporting data.
Configuration of CHAP authentication settings for security.
Returning to E-QIP configuration for Port B.
Steps for setting up a Fibre Channel partition using QIP.
Configuring drive visibility for Fibre Channel QIPs.
Configuration steps for Fibre Channel QIPs.
Steps for configuring a partition with direct-attached Fibre Channel drives.
Setting the robotic control path for direct-attached Fibre Channel.
Assigning chambers and drives for direct-attached partitions.
Configuration of Fibre Channel loop IDs.
Setting user access for Fibre Channel partitions.
Defining robotic path visibility for Fibre Channel.
Configuration steps for F-QIPs connected directly to drives.
Final steps to confirm and save partition configuration.
Verification of partition configuration settings before saving.
Accessing the partition settings for modification.
Instructions for loading media into a newly partitioned library.
Steps to fill the storage pool with media.
Specific steps for filling the EE pool with tape media.
How the library inventories media and retains data.
Checklist of information needed for library configuration.
Steps to set up and manage library user accounts and privileges.
Configuration of general library settings like name and network.
Defines privileges for Superuser, Administrator, and Operator groups.
Procedure for creating new user accounts in the library.
Steps to modify settings for existing library users.
Procedure for removing library user accounts.
Configuration of network addressing (DHCP or Static IP).
Setting up email addresses for library notifications.
How to enter information using keyboards or the LC.
Using the Remote Library Controller for library management.
Connecting and using an external computer keyboard.
Best practices for handling tape cartridges and TeraPack containers.
Efficient methods for importing and exporting tape media in bulk.
Guidance on selecting the appropriate RAID level based on needs.
Tips for maintenance, handling, and storage of RXT components.
Detailed steps for importing TeraPack containers or RXT media packs.
Option to import media directly to storage.
Steps to export media in bulk from a partition.
Procedures for cleaning tape drives and checking status.
Step-by-step guide to replacing the air filter.
Steps and sources for updating library firmware.
Procedures for uploading new firmware packages to the library.
Steps to check and interpret system messages for troubleshooting.
How to check the current firmware package version.
Steps to restore the library's configuration from various sources.
Procedures for resetting LCM/RCM and QIP components.
Step-by-step guide to resolve robotics blockage issues.
Information on updating drive firmware when notified.
How to interpret LTO drive LEDs and SCDs for troubleshooting.
Interpretation of LTO-3 drive LEDs and SCDs for troubleshooting.
Interpretation of LTO-4 drive LEDs and SCDs for troubleshooting.
Overview of Spectra Logic's technical support services.
Procedures to follow before contacting support and available service options.
How to open a support ticket via AutoSupport, phone, or email.
Explanation of the AutoSupport technical support feature.
Details of the premium Platinum Support option for mission-critical environments.
To Next Page
