Need help?Do you have a question about the Spectra-Physics Quanta-Ray GCR-16 and is the answer not in the manual?
General| Brand | Spectra-Physics |
|---|---|
| Model | Quanta-Ray GCR-16 |
| Category | Laboratory Equipment |
| Language | English |
Lists standard SI units, their abbreviations, and common prefixes used in Spectra-Physics manuals.
Defines the meaning of NOTE, CAUTION, WARNING, and DANGER notations within the manual.
Explains the fundamental principles of how lasers emit and absorb light.
Details the concept of population inversion crucial for laser operation.
Describes the properties and use of Nd:YAG as the active medium in lasers.
Explains the Q-switching technique to produce short, high-intensity laser pulses.
Discusses the role and types of resonant optical cavities in laser operation.
Details the sequence and timing of electrical signals for laser pulsing.
Outlines the technical specifications and performance characteristics of the laser models.
Provides essential precautions for operating high-power Class IV lasers safely.
Warns about the dangers of focused back reflections and potential equipment damage.
Details maintenance required to keep the laser compliant with radiological health regulations.
Lists authoritative sources for laser safety standards and guidance.
Guides through the initial unpacking and installation steps for the laser.
Provides instructions for connecting the laser to the electrical power supply.
Details the procedure for filling and preparing the laser's cooling system.
Explains the controls and functions of the remote control panel.
Describes the various controls and connectors on the laser power supply.
Details the controls on the laser head, including emission indicator.
Step-by-step guide for safely starting up the laser system.
Provides a general overview of the CIM-1 module's capabilities and purpose.
Explains how to control and diagnose the laser system via computer.
Describes the watchdog interlock feature for system safety.
Details the setup and operation of the IEEE 488 interface for computer control.
Explains the setup and operation of the RS-232-C serial interface for computer control.
Describes the function of DIP switches for configuring interface settings.
Defines the structure and syntax for computer commands and responses.
Lists and explains the available commands for controlling the CIM-1 module.
Explains the various controls and adjustments for the HG-2 harmonic generator.
Provides step-by-step instructions for mounting and connecting the HG-2.
Details the operation of the temperature controller for harmonic generator crystals.
Guides through generating second, third, and fourth harmonic outputs.
Instructions for routine maintenance of the laser's cooling system.
Procedures for maintaining the air purge system, including filter checks.
Specific maintenance guidelines for the HG-2 harmonic generator.
Step-by-step guide for replacing the deionizing water filter cartridge.
Instructions for replacing the various air filters in the system.
Procedure for safely replacing the laser's flash lamps.
Overview of system components and the role of control signals.
Explanation of Q-switch delay adjustment and sync generator functions.
Details on Q-switch drivers and how to perform single-shot laser firing.
Explanation of interlock systems and the pulse forming network operation.
Information on the simmer supply and tests for system start-up issues.
Details the warranty terms and conditions for Spectra-Physics products.
Instructions and recommendations for returning instruments for service.
Lists worldwide service centers and contact information for assistance.
To Next Page
