To Next PageTo Next Page
Need help?Do you have a question about the Spectra-Physics Pulseo Series and is the answer not in the manual?
Introduces the Pulseo Series User's Manual and its scope.
Lists the sections included in the Pulseo Series User's Manual.
Details requirements for CE electrical equipment.
Outlines compliance with FCC Rules for digital devices.
Explains symbols used to draw attention to hazards and procedures.
Lists standard units and their abbreviations used in the manual.
Lists common prefixes used with units and their meanings.
Lists common abbreviations and acronyms used in the manual.
Describes the Spectra-Physics Pulseo system and its main characteristics.
Explains the function and configurations of the D-Series power supply.
Provides essential safety information before operating the Pulseo laser.
Lists maximum emission levels to guide safety eyewear selection and procedures.
Lists essential safety precautions for operating high-power lasers.
Identifies the locations of safety devices on the Pulseo laser system.
Explains the function and use of safety interlocks for system protection.
Details safety aspects of laser head, power supply, and shutter.
Explains the functions of the power switch and indicator lights.
Details the keyswitch's role in interlock safety and system access control.
Discusses safety features required when controlling the laser via a user-created GUI.
Shows front panel safety devices on the D-Series power supply for CDRH compliance.
Illustrates various safety warning labels affixed to the laser system.
Refers to label illustrations for larger images of numbered items.
Shows radiation control features on the D-Series power supply for CDRH compliance.
Declares the Pulseo Family of Laser Systems meets EMC and Low Voltage directives.
Explains the WEEE symbol and recycling guidelines for EU customers.
Discusses potential fire, electrical, and mechanical hazards beyond optical ones.
Lists resources for laser safety standards and guidance.
Briefly describes key design features of the laser head and power supply.
Lists all parts shipped with the laser system and highlights key features.
Explains the design and operational requirements of the Pulseo laser.
Details the laser cavity's internal design and Q-switch operation.
Explains the process of achieving UV output via frequency tripling.
Describes the power monitor and how the laser shutter is controlled.
Details E-Pulse™ technology and the Data Log software for system monitoring.
Details various system components and their functions.
Details power requirements and refers to environmental and laser specifications.
Explains fuse requirements and introduces outline drawings for the system.
Shows the interlock safety block diagram for the system.
Illustrates the Pulseo system's control hardware and connections.
Describes controls and indicators on the Pulseo laser head.
Lists and describes the connectors on the rear panel of the Pulseo laser head.
Details the pins and function of the shutter control connector.
Identifies and describes the controls and indicators on the front panel of the power supply.
Describes the controls located on the top rear panel of the D-Series power supply.
Explains opto-isolators and details LASER CONTROL interface connections.
Provides detailed descriptions of each pin in the LASER CONTROL 25-pin connector.
Details the pinout for the RS-232 serial port connection.
Lists and describes the connections on the bottom rear panel of the D-Series power supply.
Lists the chiller requirements for the Pulseo system.
Guides users through installing the USB driver and GUI control software.
Provides step-by-step instructions for installing the Pulseo USB driver.
Provides instructions for installing the Pulseo GUI control software.
Describes the controls and indicators on the Pulseo GUI control panel for system operation.
Explains how to turn the laser diodes on and off using the GUI.
Describes the gate control and its status indicator in the GUI.
Describes the shutter control and its status indicator in the GUI.
Explains SYSTEM OK, EMISSION indicator, and AUTO-TUNE control.
Controls and indicates oscillator and amplifier diode currents for performance tuning.
Allows adjustment of SHG/THG crystal temperatures and displays their status.
Controls the Q-switch repetition rate and trigger source.
Displays output power and provides text windows for commands and responses.
Provides step-by-step instructions for initial system power-up and startup.
Guides users on the correct sequence for turning the laser on and off.
Explains the various methods for controlling the laser shutter.
Differentiates between Safety Mode and Process Mode for shutter operation.
Details the process of setting up pulse-width modulation for UV pulse energy control.
Illustrates full-pulse, reduced-pulse, and minimal pulse energy outputs.
Explains generating bursts and lists methods for controlling the laser system.
Defines terms and timing relationships for external triggering.
Details methods for internal/external gating and pulse control.
Provides procedures for shutting down the laser for short or extended periods.
Provides recommendations for cleaning system filters based on operational environment.
Describes the process for cleaning air filters and grills on the power supply.
Provides step-by-step instructions for changing the desiccant canister filters in the ALPS system.
Outlines procedures for diagnosing and restoring decreased laser output power.
Explains how to measure and set crystal temperatures for optimal conversion efficiency.
Describes moving THG and SHG crystals to new spots to restore output quality.
Explains diode current adjustment and cautionary notes on power settings.
Explains the current limit to protect diode lasers and ensure longevity.
Provides instructions for changing coolant and general chiller maintenance.
Discusses the robustness of coolant hoses and inspection for wear and leakage.
Explains fault codes and lists system events with descriptions and actions.
Details the warranty terms and conditions for Spectra-Physics products.
Provides guidance on contacting Spectra-Physics for service, support, and training.
Explains the procedure and requirements for returning equipment for service or repair.
Lists worldwide Spectra-Physics service center locations and contact details.
Lists purchasable parts for replacing broken or misplaced components of the Pulseo laser system.
Explains the conventions used for serial commands and queries in the manual.
Lists common serial commands for basic system operations like power and shutter control.
Describes commands for opening/closing Q-switch gate and enabling/disabling gate control.
Lists commands for querying laser output and controlling diode currents.
Commands for setting and querying the Q-switch repetition rate.
Commands for opening, closing, and querying shutter status and modes.
Details commands for shutter modes, THG auto-tune, and humidity warnings.
Commands for moving SHG/THG crystals and monitoring their spot hours.
Details commands for temperature, signal inversion, and trigger edge settings.
Commands for controlling diode current, setting splash lines, and querying status.
Queries for system status, history, laser head hours, and serial number.
Provides a command list and queries for heatsink and tower temperatures.
Queries for system software version and recent event history.
Provides Material Safety Data Sheets for Nalco algaecide and cleaner used in the cooling system.
Form to report difficulties with instruments or manuals and provide suggestions for improvement.
General| Brand | Spectra-Physics |
|---|---|
| Model | Pulseo Series |
| Category | Laboratory Equipment |
| Language | English |
