vii
Environmental Specifications
CE Electrical Equipment Requirements
For information regarding the equipment needed to provide the required electrical
service, refer to specification EN-60309, “Plug, Outlet and Socket Couplers for
Industrial Uses,” listed in the official Journal of the European Communities.
Environmental Specifications
The environmental conditions under which the laser system function are listed on the
Spectra-Physics website at http://www.newport.com/pulseo.
These specifications reflect indoor use conditions.
Feature Specification
Altitude Up to 3000 m
Temperatures 18°C to 35°C
Maximum relative humidity 85% non-condensing for temperatures up to 31°C
Mains supply voltage Do not exceed ± 10% of the nominal voltage
Insulation category II
Pollution degree 2
Also see “Specifications” for power, heat, and cooling
specifications.
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, can cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user is required to correct the interference at his own expense.
To Next Page
Loading...
